Adding a DLink WiFi extender to your house or office is an easy way to increase network coverage and get rid of dead spots. To successfully finish the DLink wifi extender setup, adhere to following instructions.

1. First, connect your D-Link extension

A power outlet close to your router is where you should plug your D-Link WiFi extender.

Await the solid green turn of the power LED.

2. Attach the Extender

Connect to the extender's default WiFi network using a PC or mobile device. Typically, it shows up as "D-Link Extender" or something such.

As an alternative, use an Ethernet cable to link your extender to a PC.

3. Go to the Configuration Page

In the address box of a web browser, type http: //dlinkap.local.

Use 192.168.0.50, the default IP address, if that doesn't work.

Enter the dlink login information, which is often "admin" for both the username and password.

4. Set up the Extender

The accessible networks will be identified by the setup wizard.

Enter the password for your primary WiFi network after selecting it.

Configure the WiFi name and password for the extender, or use the same credentials as your primary network.

5. Finish the Configuration

Allow the extender to reboot after saving the settings.

The extension should be positioned halfway between your router and the signal-poor location.

How Can the D-Link Extender Be Reset?

You may reset dlink extender if you're having trouble connecting by holding down the reset button for ten to fifteen seconds until the LED blinks.

Use Dlinkap.local to retry the setup procedure after resetting.

By following these instructions, you can easily increase your WiFi coverage and assure a flawless D-Link WiFi Extender Setup.

For further details visit our website.