Is your mesh system frequently disconnecting or are you having trouble with the Linksys Velop offline issue? Here are some helpful solutions for your problem.

1. Internet Availability Check

Before troubleshooting your Velop system, check your modem or main router for active internet service and if everything is fine. If the internet is down, understandably, your Velop will appear offline.

2. Rebooting Your Velop Nodes

Pull the plug for around 30 seconds for both primary and secondary nodes and then plug back in. In most cases, a simple reboot will clear the small glitches bringing the system offline.

3. Firmware Update

Log in using the Linksys app or web dashboard. Head to settings to check for any firmware updates. Outdated firmware can produce too frequent disconnections or the Linksys Velop dropping connection.

4. Node Placement Status

Improper placement of nodes might cause weak signals. Ensure proper placement of your child nodes so that they do not get into weak areas from the main node.

5. Minimize Wireless Interference

Avoid putting Velop nodes alongside microwave ovens, cordless phones, or any other wireless devices that can interfere with the signals.

6. Factory Reset

Finally, if all other methods fail, perform a factory reset Linksys Velop. Hold down the reset button on every node for 10 seconds until the LED turns to red, and then reconfigure your network from the Linksys app.

Adopting the above steps will immensely contribute to fixing Linksys Velop's offline issue and provide you with a smooth Wi-Fi experience all through your home.